Rf Optic 2.5GHz Rf over Fibre Transceiver
Rf Optic 2.5GHz Rf over Fibre Transceiver
SKU:RFO-RFOF-2.5GHZ-1310
Couldn't load pickup availability
RF Optic's 2.5GHz Rf over Fibre palm-sized modules are used to convert RF signals to optical signals that can be carried over long distances. The Tx unit uses an optical transmitter that converts RF to Optical signals and the Rx unit converts them back to an RF signal. The two units are connected through single-mode fibre. We offer most modules in both the 1310 and 1550mn wavelengths.
Both the Tx and Rx units include LNAs and variable attenuators that allow you to adjust the Noise Figure, Input P1dB, IP3 with wide dynamic range values. The LNA is operated through the Rf over Fibre Software, allowing RF input power in the range of -100 dBm/1MHz for wide-band applications, with a low Noise Figure of 6 dB. The Rf over Fibre link has excellent gain flatness with 0.5dB gain tracking between different links. For special applications requiring temperature-stable operation, a unique algorithm supporting 0.5 dB over 100°C has also been developed.
D2N also offers a range of rack mounts and outdoor enclosures to suit the entire Rf Optic Rf over Fibre range. Our team of Rf Engineers can design a solution to suit your needs including site inspections, demo kit and path calculations.
Applications include Defence, Broadcast, Satellite Communications, Marine, Mining, LMR, Telco LTE
Capabilities and Functions
Rf Optic 2.5GHz Rf over Fibre Transceiver Features & Specifications
Rf Optic 2.5GHz Rf over Fibre Transceiver Product Features
- Next-generation RFoF modules with significant performance improvement.
- Supports 0.15GHz to 2.5GHz for GPS and GNSS.
- Bias-T with regulated 5V and 200mA max feed on the RF In port to power an active GPS antenna.
- Load resistor on the RF Out port draws current from the GPS antenna to bypass failsafe GPS receivers.
- Better linearity, excellent gain flatness, and Tx, Rx, and Link gain control.
- Noise Figure down to 6 dB with LNA with MDS ~-168 dB/Hz for very low incoming signals.
- Internal microcontroller allows RF and Optical control, enabled by software.
- End-to-end diagnostics reduces installation and maintenance time, enabled by software.
- Gain variation S21 (fo) of ±1 dB for 90° C variation, utilizing special algorithm.
- Remote management by GUI installed on PC.
- Impedances of 50 and 75 Ohm.
- Managed remotely by software or locally through
a navigation switch.
Rf Optic 2.5GHz Rf over Fibre Transceiver Technical Specifications
Please download the product brochure below for specifications, diagrams and test results.
Would you like more information on the Rf Optic 2.5GHz Rf over Fibre Transceiver?
For more indepth information, please download the Rf Optic 2.5GHz Rf over Fibre Transceiver product brochure.
If you'd prefer to talk it over, or would like to arrange a demonstration, our friendly team is always ready to assist. Reach out anytime!