1. Home
  2. Video Systems
  3. Matrox
  4. Matrox CIP-DSH ConvertIP DSH Dual-channel SFP HDMI-to-IP Transmitter/Receiver
Matrox CIP-DSH ConvertIP DSH Dual-channel SFP HDMI-to-IP Transmitter/Receiver Matrox CIP-DSH ConvertIP DSH Dual-channel SFP HDMI-to-IP Transmitter/Receiver

Matrox CIP-DSH ConvertIP DSH Dual-channel SFP HDMI-to-IP Transmitter/Receiver

MAT-CIP-DSH
Contact us for Pricing

    The Matrox ConvertIP DSH stands as a compact, self-sufficient device functioning as a transmitter and receiver for ST 2110 and IPMX protocols. Equipped with HDMI input/output, a single RJ45, and two SFP28 ports, this device caters to both compressed and uncompressed workflows, supporting speeds up to 25G for an exceptionally low-latency performance. It offers the flexibility of power delivery via Ethernet through its RJ45 port or via an additional power supply unit, allowing for simultaneous use to ensure power redundancy.

    CONTACT US for a demonstration or more information.

    Main Features

    • HDMI I/O
    • Multi-network support
    • 2x SFP28 (10G & 25G network support for Media and Control)
    • 1x RJ45 (1G network support for independent control network)
    • Transmit or receive IP signals from a single device
    • Boost monitoring capacity and resiliency using Daisy Chain Mode
    • Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
    • Fanless design for quiet cooling
    • Zero latency HDMI loop-out
    • Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
    • Compact form factor mounts easily to the back of a monitor
    • ConvertIP Command Center web interface for managing ConvertIP devices
    • Complimentary ConvertIP Manager Windows application for simple commission and deployment
    • HDCP 1.4 and 2.2 support

    Specifications

    Connectivity

    • Video input: 1x HDMI
    • Video output: 1x HDMI (zero latency pass-through in TX mode)
    • Video resolution: Most desktop resolutions up to 4Kp60
    • Audio input/output:
      • Up to 8 channels of audio embedded in HDMI signal
      • Unbalanced analog stereo input via 1/8″ (3.5mm) jack1
      • Line Level
    • Network connector:
      • 2x SFP28 cages for ST 2110 media and In-band control on LAN 1 and LAN 2
      • 10 GbE IEEE 802.3ae (10GBASE-SR/LR fiber module)
      • 25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S)
      • 25 GbE IEEE 802.3cc (25GBASE-LR)
      • LAN2 for redundancy mode only
      • Dedicated RJ45 management network interface for control only with PoE+ (100/1000 Mbps)
    • RS-232: yes
    • Control and management: Matrox ConvertIP Command Center (web UI) + Matrox ConvertIP Manager (software application)

    Performance

    • Maximum video resolutions: 4096 x 2160 60p
    • Bit depth and color space:
      • YCbCr 4:2:0 10-bit and 8-bit
      • YCbCr 4:2:2 10-bit
      • RBG 4:4:4 8-bit
      • SDR/HDR

    Video and Audio Processing

    • Video scaling: High Quality multi-tap 10-bit Up/Down Scaler
    • Video deinterlacing: Yes
    • Color space Conversion: Yes
    • HDCP support: HDCP 1.4 and 2.2 support

    Encoding Formats

    • Video:
      • Uncompressed
        • HD 3 Gbps and 4K 12 Gbps
      • Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content
        • Colibri codec included - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
        • JPEG-XS codec upgrade required - 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
    • Audio: Uncompressed PCM (~1 Mbps/ch)
    • Latency: Less than a 1/4 frame (<4 ms)

    Network

    • IP Addressing:
      • IPv4
      • IPv61
      • DHCP (default) and static IP
    • Supported protocols:
      • SMPTE ST 2110 (-10, 20, -21, -22, -30)
      • SMPTE 2059 (-1, -2)
      • IPMX ready
    • Redundancy: Yes (ST 2022-7)
    • Command and control: HTTPS over TCP
    • Discovery, registration and control: NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
    • PoE+: Yes (IEEE 802.3at Type 2)

    Physical

    • Dimensions: 181 (D) x 191 (W) x 36 (H) mm
    • Weight: 755g
    • Cooling: Fanless
    • Power:
      • Device: Input: 12 volts, max 18 Watts
      • PoE+
      • Optional PSU (sold separately)
        • Line Voltage: 100-240 V a.c., 0.5A
        • Frequency: 50-60 Hz
        • Input: IEC320-C14
        • Output: DIN4 locking power connector

    Hardware and Software

    • Hardware included: ConvertIP DSH appliance
    • Optional hardware: ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
    • Accessories (sold separately)
      • ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4
      • Rackmount kit (Part #: RMK-19TR-A)5
      • Angled bracket kit (Part #: RMK-6BRKT-A)
      • Secure cable solution for HDMI (Part #: SK-SLND-4)
      • NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
    • Optional software:
      • JPEG-XS codec license
      • Crestron Module to expand existing controlled environments

    Environmental

    • Operating conditions:
      • Temperature: 0 to 45 degrees Celsius
      • Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m)
      • Humidity: 20% to 80% non-condensing
    • Storage conditions:
      • Temperature: -40 to 70 degrees Celsius
      • Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m)
      • Humidity: 5% to 95% non-condensing

    General

    • EMC/EMI device class: Class A
    • EMC/EMI compliance: RCM (Aus/NZ), CE (EU), FCC (USA), ICES-003 (Canada), KC (Korea)
    • Environmental compliance: China RoHS, EU RoHS, REACH
    • Warranty: Three-year limited warranty with free online or telephone support